Lugar de publicación

• Assessment of the Interactions Between Hemicellulose Xylan and Kaolinite Clay: Structural Characterization and Adsorptive Behavior.  17(14). 2025
• Cationized Hemp Fiber to Improve the Interfacial Adhesion in PLA Composite.  17(5). 2025
• Experimental and Molecular Dynamics Study of Pyrite Effects on the Flocculation of Clayey Tailings in Seawater.  17(21). 2025
• From Cellulose to Functional Electrode SCNF:rGO Hybrid Films for Electrochemical Applications.  17(23). 2025
• Molecular Dynamics Study of Polyacrylamide and Polysaccharide-Derived Flocculants Adsorption on Mg(OH)2 Surfaces at pH 11.  17(2). 2025
• New Alternatives in the Valorisation of Eucalyptus globulus By-Products for the Textile Industry.  17(12). 2025
• Poly(3-hydroxybutyrate)/Clay/Essential Oils Bionanocomposites Incorporating Biochar: Thermo-Mechanical and Antioxidant Properties.  17(9). 2025
• Rheological and Chemical Effects of Waste Tire Pyrolytic Oil and Its Encapsulation as Rejuvenators on Asphalt Binders.  17(18). 2025
• Silicon-Containing TT-Conjugated Schiff Base Oligomers with Naphthalene or Binaphthalene Moieties in the Backbone: Synthesis and Study of Properties.  17(10). 2025
• Synthesis and Characterization of Phosphorylated Cellulose Nanocrystals: Exploring Factors for Enhanced Thermal and Colloidal Stability.  17(19). 2025
• Understanding the Effect of Graphene Nanoplatelet Size on the Mechanical and Thermal Properties of Fluoroelastomer-Based Composites.  17(18). 2025
• Composites Based on Eucalyptus Nitens Leaves and Natural Rubber as a Valuable Alternative for the Development of Elastomeric Materials with Low Microbiological Impact.  16(15). 2024
• Design and Study of Novel Composites Based on EPDM Rubber Containing Bismuth (III) Oxide and Graphene Nanoplatelets for Gamma Radiation Shielding.  16(5). 2024
• Enhancing Alginate Hydrogels as Possible Wound-Healing Patches: The Synergistic Impact of Reduced Graphene Oxide and Tannins on Mechanical and Adhesive Properties.  16(8). 2024
• On the Use of Styrene-Based Nanoparticles to Mitigate the Effect of Montmorillonite in Copper Sulfide Recovery by Flotation.  16(12). 2024
• Preparation and Characterization of Lignin Nanoparticles from Different Plant Sources.  16(11). 2024
• Rheological Behavior of Clay Tailings in the Presence of Divalent Cations and Sodium Polyacrylate: Insights from Molecular Dynamics Simulations.  16(21). 2024
• Analytical Pyrolysis of Pinus radiata and Eucalyptus globulus: Effects of Microwave Pretreatment on Pyrolytic Vapours Composition.  15(18). 2023
• Biodegradable Green Composites: Effects of Potassium Permanganate (KMnO4) Treatment on Thermal, Mechanical, and Morphological Behavior of Butea Parviflora (BP) Fibers.  15(9). 2023
• Characterisation of Sodium Acetate Treatment on Acacia pennata Natural Fibres.  15(9). 2023
• Comparative Study of the Removal Efficiency of Nalidixic Acid by Poly[(4-vinylbenzyl)trimethylammonium Chloride] and N-Alkylated Chitosan through the Ultrafiltration Technique and Its Approximation through Theoretical Calculations.  15(15). 2023
• Compressive Yield Stress of Flocculated Kaolin Suspensions in Seawater.  15(3). 2023
• Foaming Properties of Lignosulfonates in the Flotation Process.  15(17). 2023
• Investigating the Mechanical, Thermal, and Crystalline Properties of Raw and Potassium Hydroxide Treated Butea Parviflora Fibers for Green Polymer Composites.  15(17). 2023
• Investigation on Properties of Raw and Alkali Treated Novel Cellulosic Root Fibres of Zea Mays for Polymeric Composites.  15(7). 2023
• Microstructure and Water Retention Kinetics in Autogenous Cured Self-Compacting Concrete Blends Using Super Absorbent Polymer.  15(18). 2023
• Nanocarrier of a-Tocopheryl Succinate Based on a Copolymer Derivative of (4,7-dichloroquinolin-2-yl)methanol and Its Cytotoxicity against a Breast Cancer Cell Line.  15(22). 2023
• New Light-Green Thermally Activated Delayed Fluorescence Polymer Based on Dimethylacridine-Triphenyltriazine Light-Emitting Unit and Tetraphenylsilane Moiety as Non-Conjugated Backbone.  15(1). 2023
• Optimised Sunflower Oil Content for Encapsulation by Vibrating Technology as a Rejuvenating Solution for Asphalt Self-Healing.  15(6). 2023
• Self-Assembled CNF/rGO/Tannin Composite: Study of the Physicochemical and Wound Healing Properties.  15(12). 2023
• A Molecular Dynamics Simulation of Polymers' Interactions with Kaolinite (010) Surfaces in Saline Solutions.  14(8). 2022
• Alkalization of Kraft Pulps from Pine and Eucalyptus and Its Effect on Enzymatic Saccharification and Viscosity Control of Cellulose.  14(15). 2022
• Electrical Properties of Polyetherimide-Based Nanocomposites Filled with Reduced Graphene Oxide and Graphene Oxide-Barium Titanate-Based Hybrid Nanoparticles.  14(20). 2022
• Estimating the Shear Resistance of Flocculated Kaolin Aggregates: Effect of Flocculation Time, Flocculant Dose, and Water Quality.  14(7). 2022
• Evaluation of the optimal uses of five genotypes of musa textilis fiber grown in the tropical region.  14(9). 2022
• Fabrication of biocompatible electrospun poly(epsilon-caprolactone)/gelatin nanofibers loaded with pinus radiata bark extracts for wound healing applications.  14(12). 2022
• Grape Canes (Vitis vinifera L.) Applications on Packaging and Particleboard Industry: New Bioadhesive Based on Grape Extracts and Citric Acid.  14(6). 2022
• Hybrid Materials Based on Nanoparticles Functionalized with Alkylsilanes Covalently Anchored to Epoxy Matrices.  14(8). 2022
• Impact of Crosslinking on the Characteristics of Pectin Monolith Cryogels.  14(23). 2022
• Macroscopic Stress-Strain Response and Strain-Localization Behavior of Biopolymer-Treated Soil.  14(5). 2022
• Molecular dynamics simulations of the interactions between a hydrolyzed polyacrylamide with the face and edge surfaces of molybdenite.  14(17). 2022
• Preparation of Poly(vinyl Alcohol) Microparticles for Freeze Protection of Sensitive Fruit Crops.  14(12). 2022
• Relationships between Size Distribution, Morphological Characteristics, and Viscosity of Cellulose Nanofibril Dispersions.  14(18). 2022
• Species Surface Distribution and Surface Tension of Aqueous Solutions of MIBC and NaCl Using Molecular Dynamics Simulations.  14(10). 2022
• Stress Dependent Biofilm Formation and Bioactive Melanin Pigment Production by a Thermophilic Bacillus Species from Chilean Hot Spring.  14(4). 2022
• The Impact of Residual Dispersant on the Flocculation and Sedimentation of Synthetic Tailings in Seawater.  14(10). 2022
• The Role of Eucalyptus Species on the Structural and Thermal Performance of Cellulose Nanocrystals (CNCs) Isolated by Acid Hydrolysis.  14(3). 2022
• Understanding the interaction of lignosulfonates for the separation of molybdenite and chalcopyrite in seawater flotation processes.  14(14). 2022
• Antibacterial and Antifungal Properties of Electrospun Recycled PET Polymeric Fibers Functionalized with Zinc Oxide Nanoparticles.  13(21). 2021
• Computational Study on Temperature Driven Structure-Function Relationship of Polysaccharide Producing Bacterial Glycosyl Transferase Enzyme.  13(11). 2021
• Dextran-Based Edible Coatings to Prolong the Shelf Life of Blueberries.  13(23). 2021
• Enhancement of Chloroprene/Natural/Butadiene Rubber Nanocomposite Properties Using Organoclays and Their Combination with Carbon Black as Fillers.  13(7). 2021
• Impact of the Enzyme Charge on the Production and Morphological Features of Cellulose Nanofibrils.  13(19). 2021
• Lime/Sodium Carbonate Treated Seawater to Improve Flocculation and Sedimentation of Clay-Based Tailings.  13(23). 2021
• Molecular Dynamics Study of the Conformation, Ion Adsorption, Diffusion, and Water Structure of Soluble Polymers in Saline Solutions.  13(20). 2021
• Molecularly Imprinted Nanoparticles (NanoMIPs) Selective for Proteins: Optimization of a Protocol for Solid-Phase Synthesis Using Automatic Chemical Reactor.  13(3). 2021
• Study of the Influence of Magnetite Nanoparticles Supported on Thermally Reduced Graphene Oxide as Filler on the Mechanical and Magnetic Properties of Polypropylene and Polylactic Acid Nanocomposites.  13(10). 2021
• Thermally Reduced Graphene Oxide/Thermoplastic Polyurethane Nanocomposites: Mechanical and Barrier Properties.  13(1). 2021
• Use of Poly(vinyl alcohol)-Malic Acid (CLHPMA) Hydrogels and Chitosan Coated Calcium Alginate (CCCA) Microparticles as Potential Sorbent Phases for the Extraction and Quantitative Determination of Pesticides from Aqueous Solutions.  13(22). 2021
• Copper-Polyurethane Composite Materials: Particle Size Effect on the Physical-Chemical and Antibacterial Properties.  12(9). 2020
• Electrical Properties of Poly(Monomethyl Itaconate)/Few-Layer Functionalized Graphene Oxide/Lithium Ion Nanocomposites.  12(11). 2020
• In Vitro Hyperthermia Evaluation of Electrospun Polymer Composite Fibers Loaded with Reduced Graphene Oxide.  12(11). 2020
• Physico-Chemical and Antiadhesive Properties of Poly(Lactic Acid)/Grapevine Cane Extract Films against Food Pathogenic Microorganisms.  12(12). 2020
• SEBS-Grafted Itaconic Acid as Compatibilizer for Elastomer Nanocomposites Based on BaTiO3 Particles.  12(3). 2020
• Molecularly imprinted nanoparticles assay (MINA) in pseudo ELISA: An alternative to detect and quantify octopamine in water and human urine samples.  11(9):1-13. 2019
• New Triphenylamine-Based Oligomeric Schiff Bases Containing Tetraphenylsilane Moieties in the Backbone.  11(2). 2019
• Synthesis and Properties of Poly(imides) and Poly(imides)/Ionic Liquid Composites Bearing a Benzimidazole Moiety.  11(5):1-20. 2019
• Molecularly Imprinted Polymers for the Selective Extraction of Bisphenol A and Progesterone from Aqueous Media.  10(6):1-16. 2018