Puesto de trabajo HR
- Profesor Asociado
Cerrar
Lanziotti Muñoz, Carlos Andrés
Posiciones
- Profesor Asociado, Departamento de Ingeniería Mecánica , Facultad de Ingeniería
Visión General
Publicaciones
publicaciones seleccionadas
-
artículo académico
- Acoustic Emission-Based Method for IFSS Characterization in Single-Fiber Fragmentation Tests. APPLIED SCIENCES-BASEL. 15(8). 2025
- Cationized Hemp Fiber to Improve the Interfacial Adhesion in PLA Composite. POLYMERS. 17(5). 2025
- Computational Design of High-Performance U-Shaped Seismic Dampers Using Statistical Optimization. MATERIALS. 18(23). 2025
- Impact of CH2Cl2 and CHCl3 on the mechanical behavior and surface smoothing of FDM 3D-printed structures. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY. 139(7-8):3723-3734. 2025
- Influence of Sintering Temperature on the Microstructure and Mechanical Behavior of Recycled AA2124. ADVANCED ENGINEERING MATERIALS. 27(15). 2025
- Progressive stiffening in GFRP composites with low-concentration, non-functionalized SiC microparticles: An experimental-computational approach. JOURNAL OF REINFORCED PLASTICS AND COMPOSITES. 44(21-22):2476-2491. 2025
- Ultrahigh Damping Efficiency in Laser Powder Bed Fusion Kelvin Metamaterials for Hysteretic Applications. ADVANCED ENGINEERING MATERIALS. 1-9. 2025
- A Combined Experimental and Numerical Calibration Approach for Modeling the Performance of Aerospace-Grade Titanium Alloy Products. AEROSPACE. 11(4). 2024
- Assessing Feed-Forward Backpropagation Artificial Neural Networks for Strain-Rate-Sensitive Mechanical Modeling. MATERIALS. 17(2). 2024
- Biocidal effects of organometallic materials supported on ZSM-5 Zeolite: Influence of the physicochemical and surface properties. HELIYON. 10(5). 2024
- Contact antibacterial and biocompatible polymeric, composite with copper zeolite filler and copper oxide, nanoparticles: A step towards new raw materials for the biomedical industry. POLYMER. 315. 2024
- Environmental evaluation of applications of concrete with recycled material from tyre. PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS-ENGINEERING SUSTAINABILITY. 177(1):3-18. 2024
- Fracture Resistance and Failure Mode of Polyethylene Fiber-reinforced Resin-based Restorations in Structurally Compromised Premolars: an in Vitro Study. OPERATIVE DENTISTRY. 49(4):455-464. 2024
- High-Performance Concrete from Rubber and Shell Waste Materials: Experimental and Computational Analysis. MATERIALS. 17(22). 2024
- Influence of martensite and grain size on the mechanical behavior of austenitic Fe–C–Mn–Ni–Al medium Mn steels with TWIP mechanism under uniaxial tension/compression and micromechanical creep. MATERIALS CHEMISTRY AND PHYSICS. 328. 2024
- Multi-Species Biofilm Interactions and Their Impact on the Biocorrosion of Copper-Coated CoCr Alloys in Dental Application. COATINGS. 14(7). 2024
- Polypropylene with clay-filled for fused filament fabrication: comparative study of the mechanical performance of injected and 3d printed composite. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY. 130(9-10):4251-4262. 2024
- Sigma Phase Stabilization by Nb Doping in a New High-Entropy Alloy in the FeCrMnNiCu System: A Study of Phase Prediction and Nanomechanical Response. METALS. 14(1). 2024
- Characterization approaches affect asymmetric load predictions of hexagonal close-packed alloy. JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T. 26:5028-5036. 2023
- Characterization of Nb-Si-doped low-carbon steel treated by quenching and partitioning: Thermic treatment in two stages supported by computational thermodynamical simulation and controlled sample dimensions. MATERIALS TODAY COMMUNICATIONS . 34. 2023
- Design of Fe36.29Cr28.9Ni26.15Cu4.17Ti1.67V2.48C0.46 HEA using a new criterion based on VEC: Microstructural study and multiscale mechanical response. MATERIALS TODAY COMMUNICATIONS . 35. 2023
- Enhancing mechanical properties of PLA and PP composites through ionic zeolite with copper nanoparticle reinforcement: microstructural and micromechanical characterization. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY. 129(7-8):3375-3386. 2023
- Exploring the Impact of Cooling Rate on Microstructural Features, Mechanical Properties, and Corrosion Resistance of a Novel Nb-Stabilized Super Duplex Stainless Steel in Shielded Metal Arc Welding. CRYSTALS. 13(8). 2023
- Influence stacking sequence and heat treatments on the out-of-plane mechanical properties of 3D-printed fiberglass-reinforced thermoplastics. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY. 125(9-10):4753-4764. 2023
- Production of Nb-doped super duplex stainless steel based on recycled material: A study of the microstructural characterization, corrosion, and mechanical behavior. MATERIALS CHEMISTRY AND PHYSICS. 308. 2023
- Quantifying the influence of reinforcement architecture on the planar mechanical properties of 3D-printed continuous fiber-reinforced thermoplastic composites. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY. 127(3-4):1575-1583. 2023
- Study of the Antibacterial Capacity of a Biomaterial of Zeolites Saturated with Copper Ions (Cu2+) and Supported with Copper Oxide (CuO) Nanoparticles. NANOMATERIALS. 13(14). 2023
- Supervised machine learning-based multi-class phase prediction in high-entropy alloys using robust databases. JOURNAL OF ALLOYS AND COMPOUNDS. 962. 2023
- Towards recycling of waste carbon fiber: Strength, morphology and structural features of recovered carbon fibers. WASTE MANAGEMENT. 165:59-69. 2023
- Comparative study of fire-resistant coatings based on high and low molecular weight tannins. JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH. 19(2):453-465. 2022
- Dynamic numerical prediction of plasticity and damage in a turbofan blade containment test. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS. 1-10. 2022
- Effect of 0.5% CNT reinforcement of a glass fiber composite on strength and cyclic damage induced by transverse and out-of-plane compressive loads. JOURNAL OF COMPOSITE MATERIALS. 56(18):2895-2906. 2022
- Evaluation of the Mechanical and Fire Resistance Properties of Rigid Tannin Polyurethane Foams with Copper Oxide Nanoparticles. FIBERS AND POLYMERS . 23(7):1797-1806. 2022
- Hybrid Materials Based on Nanoparticles Functionalized with Alkylsilanes Covalently Anchored to Epoxy Matrices. POLYMERS. 14(8). 2022
- The effect of preheating of nano-filler composite resins on their degree of conversion and microfiltration in dental fillings. POLYMER BULLETIN. 79(12):10707-10722. 2022
- Condensed tannin resins extracted from Pinus radiata bark as a support matrix in carbon nanofiber-reinforced polymers. POLYMER BULLETIN. 2021
- Experimental Correlation of Mechanical Properties of the Ti-6Al-4V Alloy at Different Length Scales. METALS. 11(1). 2021
- Experimental Evaluation of Cement Mortars with End-of-Life Tyres Exposed to Different Surface Treatments. CRYSTALS. 11(5). 2021
- Numerical Prediction of Failure in Unidirectional Fiber Reinforced Composite. INTERNATIONAL JOURNAL OF APPLIED MECHANICS. 13(6). 2021
- Ultrafast carbon nanotubes growth on recycled carbon fibers and their evaluation on interfacial shear strength in reinforced composites. SCIENTIFIC REPORTS. 11(1). 2021
- Experimental characterization of the compressive mechanical behaviour of Ti6Al4V alloy at constant strain rates over the full elastoplastic range. INTERNATIONAL JOURNAL OF MATERIAL FORMING. 13:709-724. 2020
- Improvement of thermomechanical properties of composite based on hydroxyapatite functionalized with alkylsilanes in epoxy matrix. CERAMICS INTERNATIONAL. 46(6):8368-8378. 2020
- Surface Modification of Rubber from End-of-Life Tires for Use in Concrete: A Design of Experiments Approach. JOURNAL OF THE CHILEAN CHEMICAL SOCIETY. 65(4):4988-4991. 2020
- Comparative Study of the Antimicrobial Effect of Nanocomposites and Composite Based on Poly(butylene adipate-co-terephthalate) Using Cu and Cu/Cu2O Nanoparticles and CuSO4. NANOSCALE RESEARCH LETTERS. 14:1-17. 2019
- Correlation between mechanical and microstructural properties of vulcanized polyisoprene, polychloroprene, and nitrile-butadiene rubber subjected to accelerated thermal aging. JOURNAL OF ELASTOMERS AND PLASTICS. 51(6):493-511. 2019
- Influence of aramid fibers on the mechanical behavior of a hybrid carbon-aramid-reinforced epoxy composite. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS. 232(1):58-66. 2018
- Synthesis of Copper Nanowires and Their Antimicrobial Activity on Strains Isolated Persistent Endodontic Infections. JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY. 18(7):4507-4514. 2018
- The effect of molecular weight and hydrolysis degree of poly(vinyl alcohol)(PVA) on the thermal and mechanical properties of poly(lactic acid)/PVA blends. POLIMEROS-CIENCIA E TECNOLOGIA. 28(2):169-177. 2018
- Development and characterization of polyvinyl alcohol stabilized polylactic acid/ZnO nanocomposites. MATERIALS RESEARCH EXPRESS. 4(10):1-8. 2017
- Estimation of the surface interaction mechanism of ZnO nanoparticles modified with organosilane groups by Raman spectroscopy. CERAMICS INTERNATIONAL. 43(15):11838-11847. 2017
- Multiscale Characterization of Nanoengineered Fiber-Reinforced Composites: Effect of Carbon Nanotubes on the Out-of-Plane Mechanical Behavior. JOURNAL OF NANOMATERIALS. 2017:1-9. 2017
- Comparison of push-in and push-out tests for measuring interfacial shear strength in nano-reinforced composite materials. JOURNAL OF COMPOSITE MATERIALS. 50(12):1651-1659. 2016
- Effect of ZnO nanoparticles obtained by arc discharge on thermo-mechanical properties of matrix thermoset nanocomposites. JOURNAL OF APPLIED POLYMER SCIENCE. 133(30):1-8. 2016
- Rapid synthesis and photocatalytic activity of ZnO nanowires obtained through microwave-assisted thermal decomposition. CERAMICS INTERNATIONAL. 42(16):18045-18052. 2016
-
libro
Contacto
nombre completo
- Carlos Andrés Medina Muñoz
- Carlos Andrés Lanziotti Muñoz
correos electrónicos adicionales
- cmedinam@udec.cl
red de Coautor
Mapa de la ciencia